Ads-technologies NetDSL 800 ADSL Modem version 5.2b1 Manuel d'utilisateur télécharger pdf (Page 15)

3-1

Software

Installation 3

This Chapter Includes:

3.1 About TCP/IP.......................................... 3-1

3.2 Detecting TCP/IP in Windows® 95/98.... 3-1

3.3 Installing TCP/IP in Windows® 95/98..... 3-2

3.4 Configuring TCP/IP in Windows® 95/98 3-2

3.5 Detecting TCP/IP in Windows® 2000..... 3-3

3.6 Installing TCP/IP in Windows 2000 ........ 3-3

3.7 Configuring TCP/IP in Windows® 2000 . 3-4

3.8 Detecting TCP/IP in Windows® NT 4.0.. 3-4

3.9 Installing TCP/IP in Windows® NT 4.0... 3-5

3.10 Configuring TCP/IP in Windows® NT 4.03-5

3.11 Installing the Software Drivers................ 3-6

3.1 About TCP/IP

To gain high-speed and shared access to the Wide Area Network (WAN), your

Local Area Network (LAN) needs to be configured for the modem. Each network

node on your LAN must install a network protocol so that they can communicate

with the modem. The modem requires the TCP/IP network protocol. The TCP/IP

Properties window in Windows

95/98/2000 or NT 4.0 connects the node’s

Ethernet information to the network’s protocol data. Make sure that each network

node on your LAN has TCP/IP available. To ensure smooth setup, you must

install the TCP/IP network protocol on the PCs before you install the modem.

Note:

We have already configured your NetDSL prior to shipping. The NetDSL

is configured with the default IP address of 192.168.1.1 and subnet mask of

255.255.255.0.

3.2 Detecting TCP/IP in

Windows

95/98

Step 1. Turn on your computer and start Windows

95/98.

Step 2. Click the Start button and then select Settings.

Step 3. Choose Control Panel and double click Network icon.

Step 4. Click the Configuration tab.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 62 63

Pas de commentaire

Ads-technologies NetDSL 800 ADSL Modem version 5.2b1 Manuel d'utilisateur Page 15